Kia Forte: Delivery Pipe Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Delivery Pipe Removal
| 1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
| 2. |
Release the residual pressure in fuel line (Refer to the Fuel
Delivery System - Repair Procedures - "Release Residual Pressure in
Fuel Line").
|
| 3. |
Disconnect the injector connector (A).
|
| 4. |
Disconnect the fuel feed tube quick-connector (B).
|
| 5. |
Remove the installation bolt (C), and then remove the delivery
pipe & injector assembly from the engine.
|
Accelerator Pedal Installation
1.
Install in the reverse order of removal.
Accelerator pedal module installation
nut:
12.8 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11. ...
Delivery Pipe Installation
1.
Install in the reverse order of removal.
Delivery pipe installation bolt:
18.6 ~ 23.5 N.m (1.9 ~ 2.4 kgf.m, 13.7 ~ 17.4 lb-ft)
...
See also:
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the smart junction box.
(Refer to Body Electri ...
Schematic Diagram
Canister
The Canister is filled with charcoal and absorbs evaporated fuel vapor
from the fuel tank. The gathered fuel vapor in canister is drawn into the intake
manifold by the ECM/PC ...
Heater & A/C Control Unit (Manual) Components
Connector Pin Function
Connector
No.
Description
Connector
No.
Description
A
1
Ground
B
14
In ...
Copyright © www.kifomanual.com 2014-2024