Kia Forte: Description - Emission Control System - Kia Forte TD 2014-2018 Service ManualKia Forte: Description

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Emission Control System / Description

Emissions Control System consists of three major systems.
The Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system recycles gas back into the intake manifold (Closed Crankcase Ventilation Type).
The Evaporative Emission Control System prevents evaporative gas from releasing into the atmosphere. This system burns gas at appropriate engine operating condition after gathering it in the canister.
The Exhaust Emission Control System converts the three pollutants [hydrocarbons (HC), carbon monoxide (CO), and oxides of nitrogen (NOx)] into harmless substances by using the 3-way catalytic converter.
Components Location
[LEV2 Type] [SULEV Type] 1. PCV valve 2. Canister 3. Purge control solenoid valve (PCSV) 4. Fuel tank pressure sensor (FTPS) 5. Caniste ...

Schematic Diagram
...

See also:

Shift Cable Removal
1. Remove the floor console assembly. (Refer to Body - "Floor Consol") 2. Remove the air duct. 3. ...

Driver Airbag (DAB) Module and Clock Spring
Driver Airbag (DAB) is installed in the steering wheel and electrically connected to SRSCM via the clock spring. It protects the driver by deploying the airbag when frontal crash occurs. The ...

Heater & A/C Control Unit (DATC) Replacement
1. Remove the audio unit. (Refer to Body Electrical System - "Audio Unit") 2. After loosening the mounting screws, remove the ...

Copyright © www.kifomanual.com 2014-2024