1. |
Open Loop air/fuel ratio is controlled by information pre-programmed
into the ECM.
|
2. |
Closed Loop air/fuel ratio is constantly adjusted by the ECM based
on information supplied by the oxygen sensor.
|
Seat Heater (Air Ventilation) Component Location
...
Seat Belt Switch Inspection
1.
Remove the connector from the switch.
2.
Check for continuity between terminals.
Seat belt condition
Continu ...
Accelerator Position Sensor (APS) Installation
1.
Install in the reverse order of removal.
Accelerator pedal module installation
nut:
12.8 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11. ...