• |
Component location : Clutch
switch is connected to top of the clutch pedal assembly.
|
• |
Function
|
1. |
Clutch operation is detected through clutch switch signal. This
signal enables ECM to cope with instant change of load condition.
|
2. |
Clutch switch signal is used to detect engaged gear with vehicle
speed and engine speed.
|
Fuel Tank Pressure Sensor (FTPS) Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the FTPS.
Specification:
...
Front Driveshaft Component
1. Driveshaft (LH)
2. Circlip
3. Driveshaft (RH)
...
Brake Switch Removal
1.
Turn ignition switch OFF.
2.
Remove the crash pad lower panel. (Refer to the Body group-"crash
pad")
3.
...