Kia Forte: Description

The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. Automatic Transaxle Fluid (ATF) passes through the oil filter and gets distributed along the oil channels. The oil becomes highly pressurized as it exits the oil pump and passes through the line pressure valve before being fed to the clutch & brake control valve, clutch, and brakes. Transaxle Control Module (TCM) controls the hydraulic pressure using solenoid valves and controls clutch and brake operations.

Hydraulic System

...

Components Location

1. Radiator 2. Mounting insulator 3. Valve body cover 4. Oil cooler tube 5. Automatic transaxle 6. Radiator upper mounting bracket 1. Automatic tra ...

See also:

Transaxle Oil Temperature Sensor Specifications
▷ Type: Negative Thermal Coefficient(NTC) Type Temp.[(°C)°F] Resistance (kΩ) (-40)-40 48.1 (-20)-4.0 15.6 (0)32.0 ...

Valve Body Removal
1. Disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - &qu ...

Cluster Ionizer Description
The cluster ionizer helps clean odor in the vehicle or from the air-conditioner system. When the ignition switch is ON, the inoizer runs a "CLEAN" mode and then a "ION" ...