Kia Forte: Drive Belt Tensioner Removal and Installation - Timing System - Engine Mechanical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Drive Belt Tensioner Removal and Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Timing System / Drive Belt Tensioner Removal and Installation

1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the alternator lower bolt (A).
3.
Remove the alternator brace (B).

Tightening torque :
21.6 ~ 32.4 N.m (2.2 ~ 3.3 kgf.m, 15.9 ~ 23.9 lb-ft)

4.
Install in the reverse order of removal.
Drive Belt Tensioner Components
1. Alternator brace 2. Adjust nut ...

Drive Belt Tensioner Inspection
Check the belt tensioner for excessive foreign substances, crack, damage or sticking of pivot shaft. Replace if necessary. ...

See also:

Fuel Filter Removal
1. Remove the fuel pump (Refer to “Fuel Pump” in this group). 2. Disconnect the electric pump wiring connector (A) and the fuel sender conn ...

Rear Alignment Adjustment
   When using a commercially available computerized wheel alignment equipment to inspect the rear wheel alignment, always p ...

Rear Door Latch Replacement
(4Door, 5Door) 1. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 2. Remove the rear door rea ...

Copyright © www.kifomanual.com 2014-2024