1. |
Remove the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
|
2. |
Remove the drive plate (A) and the adapter plate (B).
|
3. |
Install in the reverse order of removal.
|
Output Speed Sensor Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification:
Refer to "Signal Wave Form" section.
...
Heated Oxygen Sensor (HO2S) Removal
[SULEV]
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the connector (A), and th ...
Overview
Description
The trip computer is a microcomputer- controlled driver information system that
displays information related to driving.
✽ NOTICE
Some driving information stored in the trip com ...