Kia Forte: Driveshaft and axle

Shift Cable Adjustment

1. Place the shift lever in the interior, and the transmission manual control lever, to the N position. 2. Connect the shift lever (B) in ...

Specification

Engine T/M Joint type Max . permissible angle Outer Inner Outer Inner Nu 1.8 MPI 6 M/T BJ#22 TJi#22 ...

See also:

Installation
1. Install in the reverse order of removal. 2. After installation, bleed the brake system. (Refer to Brake system bleeding) ...

Ambient Temperature Sensor Description
The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, ...

Teaching Procedures
1. Key Teaching Procedure Key teaching must be done after replacing a defective ECM or when providing additional keys to the vehicle owner. The procedure st ...