1. |
Disconnect the negative (-) battery terminal.
|
2. |
Disconnect the Electric Oil Pump (EOP) connector (A).
|
3. |
Remove the under cover after lifting the vehicle with lift. (Refer
to Engine Mechanical System - "Engine Room Under Cover")
|
4. |
Remove the Electric Oil Pump (B) after removing the bolts (A-4ea).
|
Transaxle Oil Temperature Sensor Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the Solenoid valve connector.
3.
Measure resistance between sensor ...
Owner maintenance
The following lists are vehicle checks and inspections that should be performed
by the owner or an authorized Kia dealer at the frequencies indicated to help ensure
safe, dependable operation of you ...
Specification
Item
Description
Power source
3V
Operating temperature
-20°C ~ +60°C (-4°F ~ 140°F)
RF Modulation
FSK
LF Modulati ...