Never attempt to measure the circuit resistance of the Emergency
Fastening Device (EFD) even if you are using the specified tester. If
the circuit resistance is measured with a tester, the pretensioner will
be ignited accidentally. This will result in serious personal injury.
|
DC/DC Converter Installation
1.
Install in the reverse order of removal.
If the battery negative (-) c ...
Evaporator Temperature Sensor Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect evaporator temperature sensor.
3.
Using the multi-tester, measur ...
Hands Free Switch Installation
1.
Reassemble the steering wheel remote control switch after connecting
the connector.
2.
Reassemble the driver airbag module.
...