Kia Forte: Engine Coolant Temperature Sensor (ECTS) Installation
•
|
Install the component with the specified torques.
|
•
|
Note that internal damage may occur when the component
is dropped.
|
|
•
|
Apply the engine coolant to the O-ring.
|
|
•
|
Insert the sensor in the installation hole and be careful
not to damage.
|
|
1. |
Install in the reverse order of removal.
Engine coolant temperature sensor
installation:
29.4 ~ 39.2 N.m (3.0 ~ 4.0 kgf.m, 21.7 ~ 28.9 lb-ft)
|
|
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the engine coolant temperature sensor connecto ...
Crankshaft Position Sensor (CKPS) detects the crankshaft position and
is one of the most important sensors of the engine control system. If there
is no CKPS signal input, the engine may stop ...
See also:
Fluid Components Location
1. Injection hole(eyebolt)
2. Oil level plug
3. Oil drain plug
...
Installation
1.
Install the mirror assembly.
2.
Install the mirror wiring cover and connector.
...
Special Service Tools
Tool Name / Number
Illustration
Description
Alternator pulley remover wrench
09373-27000
Removal and installation of alternator pulley
...