1. |
Check the engine oil quality.
Check the oil deterioration, entry of water, discoloring of thinning.
If the quality is visibly poor, replace the oil.
|
2. |
Check the engine oil level.
After engine warm up stop the engine wait 5 minutes then check
the oil level. Oil level should be between the "L" and "F" marks on
the dipstick. If low check for leakage and add oil up to the "F" mark.
|
For best performance and maximum protection of all types of operation,
select only those lubricants which:
|
Sub Frame Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A ...
Starter Installation
1.
Install in the reverse order of removal.
Starter installation bolt:
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)
...
Seat belt restraint system
Seat belts are designed to bear upon the bony structure of the body, and should
be worn low across the pelvis, chest and shoulders as applicable. Wearing the lap
section of the belt across the abdom ...