Kia Forte: ESC OFF Switch Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Brake System / ESC(Electronic Stability Control) System / ESC OFF Switch Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the crash pad side switch assembly (A).
|
| 3. |
Disconnect the crash pad switch connector (B).
|
| 4. |
Check the continuity between the switch terminals as the ESC OFF
switch is engaged.
|
ESC OFF Switch Description
1.
The ESC OFF switch is for the user to turn off the ESC system.
2.
The ESC OFF lamp is on when ESC OFF switch is engaged.
...
Steering Angle Sensor
The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power
Steering) and it sends messages to HECU through CAN communication line.
The SAS is used to determine turning directio ...
See also:
TJ Joint Components
[LH]
1. BJ assembly
2. BJ circlip
3. BJ boot band
4. BJ boot
5. Shaft
6. TJ boot band
7. TJ boot
8. Spider assembly
9. Snap ring
10. TJ c ...
Positive Crankcase Ventilation (PCV) Valve Operation Principle
...
Component Location
1. Rear glass defogger relay (Engine room relay
box)
2. Rear glass defogger switch (A/C controller)
3. Rear glass defogger
...
Copyright © www.kifomanual.com 2014-2024