Kia Forte: Evaporator Temperature Sensor Description - Air Conditioning System - Heating,Ventilation, Air Conditioning - Kia Forte TD 2014-2018 Service ManualKia Forte: Evaporator Temperature Sensor Description

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / Evaporator Temperature Sensor Description

The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator freezing by excessive cooling.

A/C Pressure Transducer Replacement
1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery/charging station. 3. ...

Evaporator Temperature Sensor Inspection
1. Turn the ignition switch OFF. 2. Disconnect evaporator temperature sensor. 3. Using the multi-tester, measur ...

See also:

Front Door Belt Inside Weatherstrip Replacement
1. Remove the front door trim. (Refer to Front Door - "Front Door Trim") 2. Remove the front door belt inside weatherstrip (A ...

Compressor Installation
1. Make sure the compressor mounting bolt with the correct length is screwed in. Tighten the mounting bolts (A) with the specified tightening order. ...

Outside lamp
4 Door, 2Door 1. Open the trunk lid. 2. Remove the service cover by pulling out the service cover. 5 Door 1. Turn off the engine. 2. Open the tailgate. 3. Loosen the light assembly retai ...

Copyright © www.kifomanual.com 2014-2024