1. |
Turn the ignition switch OFF.
|
2. |
Disconnect evaporator temperature sensor.
|
3. |
Using the multi-tester, measure resistance between terminal "1"
and "2" of the evaporator temperature sensor.
|
4. |
Connect the evaporator temperature sensor connector.
|
5. |
Run the engine and turn the A/C switch ON, then measure the voltage
between the terminals of the harness connector.
Specification
|
Front Body
Front Body A
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Front Body B
* These dimensions indicated in th ...
Parking Brake Cable Removal
The parking brake cables must not be bent or distorted. This will
lead to stiff operation and premature failure.
...
Components
1. Timing chain cover
2. Inner roter
3. Outer roter
4. Oil pump cover
5. Relief plunger
6. Relief spring
7. Relief plug
8. O-ring (suction side)
9. O-ring (disch ...