Kia Forte: Evaporator Temperature Sensor Replacement
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / Evaporator Temperature Sensor Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Disconnect the evaporator temperature sensor connector (A).
|
| 3. |
Remove the evaporator temperature sensor (B) by pulling it out
after rotating it 90° in a counterclockwise direction.
|
| 4. |
Install in the reverse order of removal.
|
Evaporator Temperature Sensor Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect evaporator temperature sensor.
3.
Using the multi-tester, measur ...
In-car Sensor (DATC only) Description
An in-car air temperature sensor is located in the crash pad lower panel.
The sensor contains a thermistor which measures the temperature of the
inside. The signal decided by the resistance ...
See also:
Parking Assist Sensor Component
...
Interior light
Do not use the interior lights for extended periods when the engine is not running.
It may cause battery discharge.
WARNING - Interior light
Do not use the interior lights when driving in the dark ...
Seats
Driver’s seat
(1) Seat adjustment, forward / backward
(2) Seatback recliner
(3) Seat adjustment, height (for driver’s seat)
(4) Lumbar support (for driver’s seat)
(5) Driver position memory s ...
Copyright © www.kifomanual.com 2014-2024