Kia Forte: Filler-Neck Assembly Installation - Fuel Delivery System - Engine Control / Fuel System - Kia Forte TD 2014-2018 Service ManualKia Forte: Filler-Neck Assembly Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Filler-Neck Assembly Installation

1.
Install in the reverse order of removal.

Filler-neck assembly bracket installation bolt :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

Filler-Neck Assembly Removal
1. Open the fuel filler door and unfasten the filler-neck assembly mounting screw (A). 2. Remove the rear-LH wheel, tire, and the i ...

Accelerator Pedal Removal
1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). ...

See also:

Front Door Trim Replacement
(4Door, 5Door)    • Put on gloves to protect your hands. ...

Inspection
Driver Airbag (DAB) If any improper parts are found during the following inspection, replace the airbag module with a new one.    ...

On-vehicle Inspection
Inspect ignition coil assembly and Perform spark test 1. Check for DTCs.    ...

Copyright © www.kifomanual.com 2014-2024