Kia Forte: Filler-Neck Assembly Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Filler-Neck Assembly Removal
| 1. |
Open the fuel filler door and unfasten the filler-neck assembly
mounting screw (A).
|
| 2. |
Remove the rear-LH wheel, tire, and the inner wheel house.
|
| 3. |
Disconnect the fuel filter hose (A) and the ventilation hose (B).
|
| 4. |
Remove the filler-neck assembly from the vehicle after removing
the bracket mounting bolts (C).
|
Fuel Line Installation
•
Install the component with the specified torques.
•
...
Filler-Neck Assembly Installation
1.
Install in the reverse order of removal.
Filler-neck assembly bracket
installation bolt :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ...
See also:
Hood Latch Replacement
1.
Disconnect the hood latch connector (A).
2.
Remove the hood latch assembly (A) mounting bolts.
Tightening ...
Components
1. Steering column shaft
2. ECU
3. Motor
4. Steering gear box
...
Copyright © www.kifomanual.com 2014-2024