1. |
Disconnect the brake fiuid level switch connector, and remove
the reservoir cap.
|
2. |
Remove the brake fluid from the master cylinder reservior with
a syringe.
|
3. |
Remove the wheel & tire.
|
4. |
Disconnect the brake tube by loosening the tube flare nut (B).
Front
Rear
|
5. |
Remove the brake hose clip (A).
|
6. |
Disconnect the brake hose from the brake caliper by loosening
the bolt (A).
Front
Rear
|
Power Window Relay Inspection
Diagnosis With GDS
1.
It will be able to diagnose defects of power window with GDS quickly.
GDS can operates actuator forcefully, input/output value monitoring
and ...
Output Speed Sensor Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification:
Refer to "Signal Wave Form" section.
...
Hands Free Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Mod ...