Kia Forte: Parking Brake Lever Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Brake System / Parking Brake System / Parking Brake Lever Removal
The parking brake cables must not be bent or distorted. This will
lead to stiff operation and premature failure.
|
| 1. |
Remove the floor console assembly.
(Refer to Body - "Floor console")
|
| 2. |
Disconnect the connector (A) of parking brake switch.
|
| 3. |
Remove the parking brake cable (B) after removing the cable retainer
(A).
|
| 4. |
Remove the parking brake lever assembly (A) after removing the
bolts.
|
Components
1. Parking brake lever
2. Parking brake cable
3. Equalizer assembly
...
Parking Brake Lever Installation
1.
Install the parking brake lever assembly (A).
Tightening torque :
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
...
See also:
Sunroof Guide Replacement
1.
Remove the sunroof assembly.
(Refer to Sunroof - "Sunroof Assembly")
2.
Remove a drip link assembly (A) after lowering a gu ...
Installation
•
Do not turn the ignition switch ON and do not contact
the battery cable while replacin ...
Front Hub / Knuckle Reassembly
1.
Install the hub bearing to the knuckle assembly.
(1)
Lay the knuckle assembly (A) on press.
(2)
...
Copyright © www.kifomanual.com 2014-2024