Kia Forte: Parking Brake Cable Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Brake System / Parking Brake System / Parking Brake Cable Removal
The parking brake cables must not be bent or distorted. This will
lead to stiff operation and premature failure.
|
| 1. |
Remove the floor console assembly.
(Refer to Body - "Floor console")
|
| 2. |
Disconnect the connector (A) of parking brake switch.
|
| 3. |
Remove the parking brake cable (B) after removing the cable retainer
(A).
|
| 4. |
Raise the vehicle, and make sure it is securely supported.
|
| 5. |
Remove the rear tire and wheel.
|
| 6. |
Remove the parking brake cable (B), after removing the clip (A).
|
| 7. |
Loosen the parking brake cable bracket bolts and remove the parking
brake cable (A).
|
Parking Brake Lever Adjustment
Parking Brake Lever Stroke Adjustment
1.
Remove the floor console.
(Refer to Body group - "Floor console")
2.
Apply the b ...
Parking Brake Cable Installation
1.
Install the parking brake cable (A).
Tightening torque :
8.8 ~ 14.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)
...
See also:
Spark Plug Cleaning
The combustion temporarily becomes unstable, due to the aged fuel and
the carbon deposits accumulated on the spark plug(s) after long-term storage.
[1st Method]
1.
...
Rear Shock Absorber Components
1. Dust cover
2. Shock absorber
...
Inhibitor Switch Inspection
•
Thoroughly check connectors for looseness, poor connection,
bending, corrosion, contam ...
Copyright © www.kifomanual.com 2014-2024