1. |
Turn the ignition switch OFF.
|
2. |
Pull up the lock of the HECU connector (A) , then disconnect the
connector.
|
3. |
Remove the brake fluid from the master cylinder reservoir with
a syringe.
|
4. |
Disconnect the brake tubes from the HECU by unlocking the nuts
counterclockwise with a spanner.
|
5. |
Loosen the HECU bracket nuts (A), then remove HECU and bracket.
|
6. |
Remove the 3 bolts, then remove the bracket from HECU.
|
Condenser Replacement
1.
Recover the refrigerant with a recovery/ recycling/ charging station.
2.
Disconnect the negative (-) battery terminal.
3 ...
Tail Gate Latch Component Location
(5Door)
1. Tail gate latch assembly
...
Removal
1.
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
2.
Remove the front seat assembly.
...