Kia Forte: ESC Control Module Installation
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Brake System / ESC(Electronic Stability Control) System / ESC Control Module Installation
| 1. |
Install in the reverse order of removal.
|
| 2. |
Tighten the HECU mounting bolts and nuts to the specified torque.
|
| 3. |
After installation, bleed the brake system.
(Refer to ESC bleeding of ESC system)
|
ESC Control Module Removal
1.
Turn the ignition switch OFF.
2.
Pull up the lock of the HECU connector (A) , then disconnect the
connector.
...
Front Wheel Speed Sensor Components
1. Front wheel speed sensor
2. Front wheel speed sensor connector
...
See also:
Inhibitor Switch Circuit Diagram
...
A/C Pressure Transducer Inspection
1.
Measure the pressure of high pressure line by measuring voltage
output between NO.1 and NO.2 terminals.
2.
Inspect the voltage v ...
Engine coolant temperature gauge
This gauge shows the temperature of the engine coolant when the ignition switch
is ON.
Do not continue driving with an overheated engine.
If the gauge pointer moves beyond the normal range are ...
Copyright © www.kifomanual.com 2014-2024