Kia Forte: Front Wheel Speed Sensor Removal - ESC(Electronic Stability Control) System - Brake System - Kia Forte TD 2014-2018 Service ManualKia Forte: Front Wheel Speed Sensor Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Brake System / ESC(Electronic Stability Control) System / Front Wheel Speed Sensor Removal

1.
Remove the front wheel and tire.

Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

2.
Remove the front wheel speed sensor mounting bolt (A).

Tightening torque:
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

3.
Remove the front wheel guard .
4.
Disconnect the front wheel speed sensor connector (A), and then remove the front wheel speed sensor.

5.
Install in the reverse order of removal.
Front Wheel Speed Sensor Components
1. Front wheel speed sensor 2. Front wheel speed sensor connector ...

Rear Wheel Speed Sensor Components
1. Rear wheel speed sensor 2. Rear wheel speed sensor connector ...

See also:

Cylinder Head Removal
Engine removal is not required for this procedure.    • Use fender covers to avoid damaging pa ...

Replacement
[Removal]    • Put on gloves to protect your hands. • ...

Troubleshooting
   • The battery must be in good condition and fully charged for this troubleshooting. ...

Copyright © www.kifomanual.com 2014-2024