1. |
Remove the rear wheel and tire.
|
2. |
Remove the rear wheel speed sensor mounting bolt (A).
|
3. |
Remove the rear wheel speed sensor cable mounting bolt.
|
4. |
Remove the rear wheel house trim.
(Refer to Body - "Rear wheel house trim")
|
5. |
Disconnect the rear wheel speed sensor connector and than remove
the rear wheel speed sensor.
|
6. |
Install in the reverse order of removal.
|
Battery Installation
1.
Install in the reverse order of removal.
Battery (-)terminal installation:
4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)
...
Seat Heater Switch Installation
Driver/Passenger Seat
1.
Install the switchs and connect the switch connectors.
2.
Insatll the floor console assembly.
...
Component
1. Airbag module
2. Remote control assembly
3. Garnish
4. Steering wheel
5. Wiring
6. Lower cover
...