Kia Forte: Front Body
Front Body A
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
Front Body B
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
Front Body C
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
Front Body D
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
|
|
|
|
| Hood hinge mounting hole (Ø10) |
Fender apron upper member corner |
Front shock absorber mounting hole (Ø13) |
|
|
|
|
| Side outer panel front corner |
Side outer panel front corner |
Engine mounting bracket hole (Ø11) |
|
|
|
|
| Transaxle mounting hole (Ø12) |
Engine mounting bracket hole (Ø15) |
Transaxle mounting hole (Ø13) |
|
|
|
|
| Front side member tooling hole (Ø6.6) |
Front side member tooling hole (Ø6.6) |
Front end module mounting hole (Ø11.5) |
2Door
...
Side Body
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Front side m ...
See also:
Canister Close Valve (CCV) Description
Canister Close Valve (CCV) is normally open and is installed on the canister
ventilation line. It seals evaporative emission control system by shutting the
canister from the atmosphere during ...
Removal
1.
Remove the transaxle assembly.
(Refer to Manual Transaxle System - " Manual Transaxle")
2.
Remove the clutch cover bolts. ...
Warning lights
✽ NOTICE - Warning lights
Make sure that all warning lights are OFF after starting the engine. If any
light is still ON, this indicates a situation that needs attention.
Air bag Warning Ligh ...
Copyright © www.kifomanual.com 2014-2024