Kia Forte: Front Body
Front Body A
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
Front Body B
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
Front Body C
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
Front Body D
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
|
|
|
|
| Hood hinge mounting hole (Ø10) |
Fender apron upper member corner |
Front shock absorber mounting hole (Ø13) |
|
|
|
|
| Side outer panel front corner |
Side outer panel front corner |
Engine mounting bracket hole (Ø11) |
|
|
|
|
| Transaxle mounting hole (Ø12) |
Engine mounting bracket hole (Ø15) |
Transaxle mounting hole (Ø13) |
|
|
|
|
| Front side member tooling hole (Ø6.6) |
Front side member tooling hole (Ø6.6) |
Front end module mounting hole (Ø11.5) |
4Door
...
Side Body
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Front side m ...
See also:
Door Scuff Trim Replacement
(4Door, 5Door)
•
Put on gloves to protect your hands.
...
Blower Resistor Inspection
1.
Measure terminal-to-terminal resistance of the blower resistor.
2.
If the measured resistance is not within specification, the blower
re ...
Record your key number
The key code number is stamped on the key code tag attached to the key set. Should
you lose your keys, this number will enable an authorized Kia dealer to duplicate
the keys easily. Remove the k ...
Copyright © www.kifomanual.com 2014-2024