Kia Forte: Front Body
Front Body A
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
Front Body B
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
Front Body C
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
Front Body D
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
|
|
|
|
| Hood hinge mounting hole (Ø10) |
Fender apron upper member corner |
Front shock absorber mounting hole (Ø13) |
|
|
|
|
| Front shock absorber mounting hole (Ø13) |
Side outer panel front corner |
Side outer panel front corner |
|
|
|
|
| Engine mounting bracket hole (Ø11) |
Transaxle mounting hole (Ø12) |
Engine mounting bracket hole (Ø15) |
|
|
|
|
| Transaxle mounting hole (Ø13) |
Front side member tooling hole (Ø6.6) |
Front side member tooling hole (Ø6.6) |
|
|
||
| Front end module mounting hole (Ø11.5) |
5Door
...
Side Body
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Front side m ...
See also:
CVVT & Camshaft Inspection
Camshaft
1.
Inspect the cam lobes.
Using a micrometer, measure the cam lobe height.
If the cam lobe height is less than specification, replace the
camsh ...
BCM Diagnosis With GDS
1.
The body control module can diagnose by using the GDS more quickly.
The BCM communicates with the GDS and then reads the input/output
value and drives the ac ...
Seat Belt Buckle Sensor (BS)
The SRSCM shall monitor the status of the driver and passenger seat belt
buckle. The SRSCM provides one pin each for the driver and passenger seat belt
buckle status input. The seat belt buck ...