Kia Forte: Hood Assembly Replacement
| •
|
Be careful not to damage the hood and body.
|
|
| •
|
When removing and installing the hood, an assistant is
necessary.
|
| •
|
When removing the clips, use a clip remover.
|
|
|
1. |
After loosening the hood hinge (B) mounting bolts, remove the
hood assembly (A).
Tightening torque :
21.6~26.5 N.m (2.2~2.7 kgf.m, 15.9~19.5 lb-ft)
|
|
|
2. |
Install in the reverse order of removal.
|
• |
Make sure the hood locks/unlocks and opens/closes
properly.
|
|
• |
Adjust the hood alignment.
|
|
|
1.
Using a clip remover, detach the clips, and remove the hood insulator
pad (A).
...
See also:
Rear Transverse Trim Replacement
(5Door)
•
Put on gloves to protect your hands.
...
Accelerator Position Sensor (APS) Installation
1.
Install in the reverse order of removal.
Accelerator pedal module installation
nut:
12.8 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11. ...
Starting the engine
WARNING - Proper footwear
Always wear appropriate shoes when operating your vehicle. Unsuitable shoes
(high heels, ski boots, sandals, etc.) may interfere with your ability to use the
brake and acc ...
Hood Assembly Component Location
Hood Insulator Pad Replacement