Kia Forte: Hood Latch Release Handle Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle Replacement

1.	After loosening the mounting screw, then remove the hood latch release handle (A).

2.

Install in the reverse order of removal.

•	Make sure the hood latch cable is connected properly.

•	Make sure the hood locks/unlocks and opens/closes properly.

Hood Latch Release Handle Component Location

1. Hood latch release handle ...

Hood Latch Component Location

1. Hood latch assembly ...

See also:

Brake Booster Operating Test
For simple checking of the brake booster operation, carry out the following tests. 1. Run the engine for one or two minutes, and then stop it. If the pedal depresses ...

Installation
1. Install in the reverse order of removal. 2. After installation, bleed the brake system. (Refer to Brake system bleeding) ...

Timing Chain Removal
1. Remove the cylinder head cover. (Refer to Cylinder Head Assembly - "Cylinder Head Cover") 2. Set No.1 cylinder to TDC (Top ...

Categories

Copyright © www.kifomanual.com 2014-2024