Kia Forte: Trunk Lid Assembly Replacement
| •
|
Wear gloves to protect hands from injury.
|
|
| •
|
When removing and installing the trunk lid, an assistant
is necessary.
|
|
|
1. |
Remove the trunk lid trim.
(Refer to Trunk Lid - "Trunk Lid Trim")
|
|
2. |
Disconnect the connectors and trunk lid wiring harness (A).
|
|
3. |
After loosening the mounting bolts, then remove the trunk lid
assembly (B).
Tightening torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
|
|
|
4. |
Install in the reverse order of removal.
|
• |
Make sure the trunk lid locks/unlocks and opens/closes
properly.
|
|
• |
Adjust the trunk lid alignment.
|
|
• |
Make sure the connectors are connected in properly.
|
|
• |
Replace any damaged clips.
|
|
|
(4Door, 2Door)
1. Trunk lid assembly
...
(4Door, 2Door)
1. Trunk lid trim
...
See also:
Special Service Tools
Tool (Number and name)
Illustration
Use
09977-3R000
Disc & hub assembly bolt remover
Removal and installation of disc & hub assembly ...
Battery Sensor Installation
1.
Install in the reverse order of removal.
Battery sensor cable installation
bolt: 10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~10.1
lb-ft)
...
Rear Seat Latch Component Location
(4Door, 2Door)
1. Rear seat latch assembly
(5Door)
1. Rear seat latch
...
Trunk Lid Assembly Component Location
Trunk Lid Trim Component Location