Kia Forte: Tail Gate Trim Replacement
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Put on gloves to protect your hands.
|
|
1. |
Using a screwdriver or remover, remove the tail gate upper trim
(A).
|
2. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
[Tail gate trim]
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Put on gloves to protect your hands.
|
|
1. |
Using a screwdriver or remover, remove the tail gate trim (A).
|
2. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
[Tail gate side trim]
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Put on gloves to protect your hands.
|
|
1. |
Remove the tail gate upper trim.
|
2. |
Remove the tail gate trim.
|
3. |
After loosening the mounting screw, then remove the tail gate
side trim (A).
|
4. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
(5Door)
1. Tail gate trim
...
(5Door)
1. Tail gate latch assembly
...
See also:
Assist Handle Component Location
1. Assist handle
...
Front Door Side Weatherstrip Replacement
(4Door, 5Door)
1.
Loosen the front door checker (B) mounting bolt.
Tightening torque:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ...
Inspection
Lighting Switch Inspection
With the multifunction switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified, replace
the mul ...