|
1. |
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
|
2. |
Remove the front door window glass mounting hole plug.
|
3. |
Carefully move the front door window glass (A) until the glass
mounting bolts are visible, then loosen them.
(4Door, 5Door)
(2Door)
|
4. |
Check that the glass moves smoothly.
|
|
1. |
Loosen the screws (B) just enough for the striker to move.
|
2. |
Tap on the striker with a plastic hammer to adjust the striker.
The striker will not move much, but will give some adjustment.
|
3. |
Hold the outer handle out, and push the door against the body
to be sure the striker allows a flush fit. If the door latches properly,
tighten the screws and recheck.
|
|
1. |
Check that the door and body edges are parallel.
|
2. |
Place the vehicle on a firm, level surface when adjusting the
doors.
|
3. |
Adjust at the hinges (A) :
(4Door, 5Door)
(2Door)
|
4. |
Grease the pivot portions of the hinges indicated.
|
5. |
Check for water leaks.
|
Climate Control Air Filter Description
The climate control air filter is located in the blower unit. It eliminates
foreign materials and odor. The particle filter performs a role as an odor filter
as well as a conventional dust fi ...
Specifications
Front Suspension
Item
Specification
Suspension type
MacPherson Strut
Shock absorber
Type
Gas
Coil spring
Nu Engine ...
Special Service Tools
Tool
(Number and Name)
Illustration
Use
09200-3N000
Engine support fixture (Beam)
Removal and installation of the transaxle.Use this adap ...