1. |
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
|
2. |
Remove the front door belt inside weatherstrip (A).
(4Door, 5Door)
(2Door)
|
3. |
Remove the front door window glass mounting hole plug.
|
4. |
Carefully adjust the front door window glass (A) until you can
see the bolts, then loosen them. Separate the glass from the glass run
and carefully pull the glass out through the window slot.
(4Door, 5Door)
(2Door)
|
5. |
Install in the reverse order of removal.
|
Parking brake
Applying the parking brake
To engage the parking brake, first apply the foot brake and then without pressing
the release button in, pull the parking brake lever up as far as possible. In additio ...
35R Clutch Control Solenoid Valve(35R/C_VFS) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the Solenoid valve connector.
3.
Measure resistance between sensor ...
Canister Close Valve (CCV) Installation
•
Install the component with the specified torques.
•
...