(4Door, 5Door, 2Door) |
1. |
Remove the front door module.
(Refer to Front Door - "Front Door Module")
|
2. |
Disconnect the front door outside handle connector (A).
|
3. |
Remove the hole plug (B).
|
4. |
After loosening the mounting bolt, then remove the front door
outside handle cover (A).
|
5. |
Remove the front door outside handle (A) by sliding it rearward.
|
6. |
Install in the reverse order of removal.
|
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...
Transaxle Control Module (TCM) Inspection
Transaxle Control Module(TCM) Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis
ground using the backside of TCM harne ...
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the smart junction box
(Refer to Body Electri ...