Kia Forte: Rear Wheel Guard Replacement - Body Side Moulding - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Rear Wheel Guard Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Body Side Moulding / Rear Wheel Guard Replacement

  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Remove the rear tire.
2.
After loosening the mounting clips and screws, then remove the rear wheel guard (A).

3.
Install in the reverse order of removal.
  
Replace any damaged clips.
Front Wheel Guard Replacement
   • Put on gloves to protect your hands. &n ...

Front Mud Guard Replacement
   • Put on gloves to protect your hands. &nb ...

See also:

Canister Installation
1. Installation is the reverse of removal. Canister installation bolt/nut: 19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft) ...

Engine And Transaxle Assembly Installation
Installation is in the reverse order of removal. Perform the following : • Adjust shift cable. • Adjust throttle cable. • ...

Component Location
1. Fender assembly ...

Copyright © www.kifomanual.com 2014-2024