Kia Forte: Rear Mud Guard Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Body Side Moulding / Rear Mud Guard Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.	After loosening the mounting clip and screws, then remove the rear mud guard (A).

2.

Install in the reverse order of removal.

•	Replace any damaged clips.

Front Mud Guard Replacement

• Put on gloves to protect your hands. &nb ...

Rear Spoiler Replacement

(5Door) • When prying with a flat-tip screwdriver, wrap it with protective ...

See also:

Starter Relay Inspection
1. Disconnect the battery negative terminal. 2. Remove the fuse box cover. 3. Remove the starter relay (A). ...

Crankshaft Position Sensor (CKPS) Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the crankshaft position sensor connector (A) ...

Evaporator Temperature Sensor Inspection
1. Turn the ignition switch OFF. 2. Disconnect evaporator temperature sensor. 3. Using the multi-tester, measur ...

Categories

Copyright © www.kifomanual.com 2014-2024