Kia Forte: Outside Rear View Mirror Replacement - Mirror - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Outside Rear View Mirror Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Mirror / Outside Rear View Mirror Replacement

(4Door, 5Door)
  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Using a screwdriver or remover, remove the front door quadrant inner cover (A).

2.
Disconnect the outside rear view mirror connector (B).
3.
After loosening the mounting bolts, then remove the outside rear view mirror (A).

Tightening torque :
6.9~10.8 N.m(0.7~1.1 kgf.m, 5.1~8.0 lb-ft)

4.
Install in the reverse order of removal.
  
Make sure the connector is connected properly.
Replace any damaged clips.
(2Door)
  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Using a screwdriver or remover, remove the front door quadrant inner cover (A).

2.
Loosen the outside rear view mirror mounting screw (A).

3.
After loosening the mounting bolts, then remove the outside rear view mirror (A).
4.
Disconnect the outside rear view mirror connector (B).

Tightening torque :
6.9~10.8 N.m(0.7~1.1 kgf.m, 5.1~8.0 lb-ft)

5.
Install in the reverse order of removal.
  
Make sure the connector is connected properly.
Replace any damaged clips.
Outside Rear View Mirror Component Location
(4Door, 5Door) 1. Outside rear view mirror (2Door) 1. Outside rear view mirror ...

Inside Rear View Mirror  Component Location
1. Inside rear view mirror ...

See also:

Power windows (if equipped)
The ignition switch must be in the ON position for power windows to operate. Each door has a power window switch that controls the door’s window. The driver has a power window lock switch which can ...

AGM Battery Removal
1. Disconnect the battery terminals (A). (1) Tightening torque (+) terminal : 7. ...

Removal
1. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner") 2. Remove the battery and battery tray ...

Copyright © www.kifomanual.com 2014-2024