Kia Forte: Rear Console Cover Replacement - Floor Console - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Rear Console Cover Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Floor Console / Rear Console Cover Replacement

  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the floor console assembly.
(Refer to Floor Console - "Floor Console Assembly")
2.
Loosen the rear console cover mounting screws (A).

3.
After loosening the mounting screws, then remove the rear console cover (A).

4.
Install in the reverse order of removal.
  
Replace any damaged clips.
Rear Console Cover Component Location
1. Rear console cover ...

Console Armrest Component Location
1. Console armrest ...

See also:

Removal
1. Turm ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the battery (A) and ECM (B). ...

Battery Components
1. Battery insulation pad 2. Battery (Non-ISG Type) 3. Battery (ISG Type) 4. Battery tray 5. Battery mounting bracket ...

Description
The ECM (Electro Chromatic inside rear view Mirror) is for dimming the reflecting light from a vehicle behind at night, Preventing glare from the light. The forward facing sensor detects brig ...

Copyright © www.kifomanual.com 2014-2024