Kia Forte: Cluster Fascia Panel Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Crash Pad / Cluster Fascia Panel Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Using a screwdriver or remover, remove the center garnish [LH] (A).

2.	Using a screwdriver or remover, remove the cluster fascia panel (A).

3.	Disconnect the start/stop button connector (A).

4.

Install in the reverse order of removal.

•	Make sure the connector are connected in properly.

•	Replace any damaged clips.

Cluster Fascia Panel Component Location

1. Cluster fascia panel ...

Center Fascia Panel Component Location

1. Center fascia panel ...

See also:

Parking Assist Sensor Removal
[Front Bumper] 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper cover. (Refer to Body - "Front Bumpe ...

Instrument cluster
1. Tachometer 2. Speedometer 3. Engine coolant temperature gauge 4. Fuel gauge 5. Turn signal indicators 6.Warning and indicator lights 7. LCD display ...

Fluid Service Adjustment Procedure
Oil level Check A check of Automatic Transaxle Fluid (ATF) level is not normally required during scheduled ...

Categories

Copyright © www.kifomanual.com 2014-2024