Kia Forte: Center Fascia Panel Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Crash Pad / Center Fascia Panel Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Using a screwdriver or remover, remove the center garnish [LH] (A).

2.	After loosening the mounting screw, then remove the center fascia panel (A).

3.	Disconnect the hazard switch connector (A).

4.

Install in the reverse order of removal.

•	Make sure the connector are connected in properly.

•	Replace any damaged clips.

Center Fascia Panel Component Location

1. Center fascia panel ...

Crash Pad Upper Panel Component Location

1. Crash pad upper panel ...

See also:

Parking Assist System Switch Installation
1. Install the switchs and connect the switch connectors. 2. Insatll the floor console assembly. 3. Connect the ...

General Features
• This audio system supports Bluetooth® hands-free and stereo-headset features. - HANDS-FREE feature: Making or receiving calls wirelessly. ...

Blower Motor Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the connector (A) of the blower motor. 3. Remove ...

Categories

Copyright © www.kifomanual.com 2014-2024