|
|
1. |
Remove the center fascia panel.
(Refer to Crash Pad - "Center Fascia Panel")
|
2. |
Remove the cluster fascia panel.
(Refer to Crash Pad - "Cluster Fascia Panel")
|
3. |
After loosening the mounting screws, then remove the drive airvent
duct assembly (A).
|
4. |
After loosening the mounting screws, then remove the clock fascia
panel (A).
|
5. |
Disconnect the clock switch connector (A).
|
6. |
After loosening the mounting screws, then remove the center airvent
duct assembly [RH] (A).
|
7. |
Remove the in-car hose (A).
|
8. |
Disconnect the in-car sensor connector (B).
|
9. |
After loosening the mounting screws, then remove the crash pad
upper panel (A).
|
10. |
Install in the reverse order of removal.
|
Rear Door Latch Component Location
(4Door, 5Door)
1. Rear door latch
...
Smart Key
Smart Key Code Saving
1.
Connect the DLC cable of GDS to the data link connector in driver
side crash pad lower panel, turn the power on GDS.
...
Auto Head Lamp Leveling Unit Installation
1.
Install the head lamp leveling unit.
2.
Reconnect the head lamp leveling unit connector.
...