|
|
1. |
Using a screwdriver or remover, remove the crash pad side cover
[LH] (A).
|
2. |
After loosening the mounting screws, then remove the crash pad
lower panel (A).
|
3. |
Disconnect the diagnosis connector (A).
|
4. |
Install in the reverse order of removal.
|
Engine coolant temperature gauge
This gauge shows the temperature of the engine coolant when the ignition switch
is ON.
Do not continue driving with an overheated engine.
If the gauge pointer moves beyond the normal range are ...
Compressor Removal
1.
If the compressor is marginally operable, run the engine at idle
speed, and let the air conditioning work for a few minutes, then shut
the engine off.
...
Front Body
Front Body A
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Front Body B
* These dimensions indicated in th ...