(4Door) |
|
|
1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
2. |
Remove the rear seat back assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
3. |
Remove the rear pillar trim.
(Refer to Interior Trim - "Rear Pillar Trim")
|
4. |
Remove the rear door scuff trim.
(Refer to Interior Trim - "Door Scuff Trim")
|
5. |
Slighty remove the rear door body side weatherstrip.
|
6. |
After loosening the mounting clips and screws, then remove the
rear partition trim (A).
|
7. |
Using a screwdriver or remover, remove the rear wheel house trim
(A).
|
8. |
Install in the reverse order of removal.
|
|
|
1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
2. |
Remove the rear seat back assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
3. |
Remove the rear shelf side trim.
(Refer to Interior Trim - "Rear Shelf Side Trim")
|
4. |
Remove the rear door scuff trim.
(Refer to Interior Trim - "Door Scuff Trim")
|
5. |
Slighty remove the rear door body side weatherstrip.
|
6. |
After loosening the mounting screw, then remove the rear wheel
house trim (A).
|
7. |
Install in the reverse order of removal.
|
AVN Head Unit Installation
1.
Connect the AVN head unit connectors and cables.
2.
Install the AVN head unit.
3.
Install the airvent ducts ...
Rheostat Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad side switch assembly (A).
3.
...
Description
Ignition timing is controlled by the electronic control ignition timing
system.
The standard reference ignition timing data for the engine operating conditions
are pre-pro grammed in the ...