(4Door) |
|
|
1. |
Remove the rear wheel house trim.
(Refer to Interior Trim - "Rear Wheel House Trim")
|
2. |
After loosening the mounting bolt, then remove the rear seat belt
lower anchor (A).
[LH,RH]
[Center]
|
3. |
Disconnect the high Mounted stop lamp (A) connecter from inside
the trunk.
|
4. |
Remove the rear seat belt upper anchor cover (A).
|
5. |
Using a screwdriver or remover, remove the rear package tray trim
(A).
|
6. |
Install in the reverse order of removal.
|
|
|
1. |
Remove the rear pillar trim.
(Refer to Interior Trim - "Rear Pillar Trim")
|
2. |
After loosening the mounting bolt, then remove the rear seat belt
lower anchor (A).
[LH,RH]
[Center]
|
3. |
After loosening the mounting clips and screws, then remove the
rear partition trim (A).
|
4. |
Remove the rear seat belt upper anchor cover (A).
|
5. |
Using a screwdriver or remover, remove the rear package tray trim
(A).
|
6. |
Install in the reverse order of removal.
|
Battery Cleaning
1.
Make sure the ignition switch and all accessories are in the OFF
position.
2.
Disconnect the battery cables (negative first).
...
Rear Pillar Trim Replacement
(4Door)
•
Put on gloves to protect your hands.
...
Garment Hook Components
(2Door)
1. Garment hook
...