Kia Forte: Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Floor Carpet / Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly")

2.	Remove the floor console assembly. (Refer to Floor Console - "Floor Console Assembly")

3.	Remove the cowl side trim. (Refer to Interior Trim - "Cowl Side Trim")

4.	Remove the center pillar lower trim. (Refer to Interior Trim - "Center Pillar Trim")

5.	Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Assembly")

6.	Remove the foot rest (A).

7.	Remove the floor carpet assembly (B).

8.

Install in the reverse order of removal.

•	Replace any damaged clips.

1. Foot rest [LHD]
2. Foot rest [RHD]
3. Floor carpet assembly

4. Fire extinguisher bracket
5. Fire extinguisher

Floor Carpet

...

Front Bumper

...

See also:

Tail Gate Latch Component Location
(5Door) 1. Tail gate latch assembly ...

Instrument Cluster Control
Adjusting Instrument Cluster Illumination The instrument panel illumination intensity can be adjusted by pressing the control switch with the headlight switch in any position when the ignition s ...

On-board Refueling Vapor Recovery (ORVR) valve Removal
1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Remove the fuel pump. (Refer to Fuel System - "Fuel Pump&qu ...

Categories

Copyright © www.kifomanual.com 2014-2024