|
|
1. |
Loosen the radiator upper cover mounting bolts.
|
2. |
Loosen the front bumper lower mounting clips.
|
3. |
After loosening the front bumper side's mounting screw, then disconnect
the side's.
|
4. |
Disconnect the fog lamp connector (A) and front bumper main connector
(B).
(4Door)
[LH]
[RH]
(5Door, 2Door)
[LH]
[RH]
|
5. |
Remove the front bumper cover (A).
(4Door)
(5Door, 2Door)
|
6. |
Install in the reverse order of removal.
|
BCM Diagnosis With GDS
1.
The body control module can diagnose by using the GDS more quickly.
The BCM communicates with the GDS and then reads the input/output
value and drives the ac ...
Body Panel Gaps
...
Input Speed Sensor Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification:
Refer to "Signal Wave Form" section.
...