(4Door) |
|
|
1. |
Remove the luggage side trim [LH].
(Refer to "Trunk Trim")
|
2. |
Disconnect the rear bumper main connector (A).
|
3. |
Remove the rear combination lamp cover [RH] (A).
|
4. |
Disconnect the connector (A), and then loosen the rear combination
lamp mounting nuts.
|
5. |
Remove the rear combination lamp (A).
|
6. |
Loosen the rear bumper upper mounting screw and clip.
|
7. |
Loosen the rear bumper lower mounting clips.
|
8. |
Loosen the mounting bolts.
|
9. |
After loosening the mounting clip and screws, then remove the
rear mud guard (A).
|
10. |
After loosening the rear bumper side's mounting screw, then disconnect
the side's.
|
11. |
Remove the rear bumper cover (A).
|
12. |
Install in the reverse order of removal.
|
|
|
1. |
Remove the rear combination lamp cover (A).
|
2. |
Disconnect the connector (A), and then loosen the rear combination
lamp mounting nuts.
|
3. |
Remove the rear combination lamp (A).
|
4. |
Loosen the rear bumper upper mounting screw and clip.
|
5. |
Loosen the rear bumper lower mounting clips.
|
6. |
Loosen the mounting bolts.
|
7. |
After loosening the rear bumper side's mounting screws and cilp,
then disconnect the side's.
|
8. |
Remove the rear bumper cover (A).
|
9. |
Disconnect the rear bumper main connector (A).
|
10. |
Install in the reverse order of removal.
|
|
|
1. |
After loosening the mounting screws, then remove the rear combination
lamp (A).
|
2. |
Disconnect the rear combination lamp connector (A).
|
3. |
Loosen the rear bumper upper side mounting screw and clip.
|
4. |
Loosen the rear bumper lower side mounting clips.
[LH]
[RH]
|
5. |
Loosen the rear bumper lower side mounting bolts.
|
6. |
After loosening the rear bumper side's mounting screws, then disconnect
the side's.
|
7. |
Remove the rear bumper cover (A).
|
8. |
Disconnect the rear bumper main connector (A).
|
9. |
Install in the reverse order of removal.
|
Rear Oil Seal Removal
1.
Remove the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
Remove the manual transaxle.
(Refer to Manual ...
Engine compartment
1. Engine oil filler cap
2. Engine oil dipstick
3. Brake/clutch fluid reservoir
4. Air cleaner
5. Fuse box
6. Positive battery terminal
7. Negative battery terminal
8. Windshield washer ...
Voice recognition
Using Voice Recognition
Starting Voice Recognition
Shortly press the
key on the steering wheel. Say a command
If prompt feedback is in [ON], then the system will say “Please say a command
a ...