Kia Forte: Rear Bumper Beam Assembly Replacement - Rear Bumper - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Rear Bumper Beam Assembly Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Rear Bumper / Rear Bumper Beam Assembly Replacement

(4Door, 2Door)
  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the rear bumper cover.
(Refer to Rear Bumper - "Rear Bumper Cover")
2.
Disconnect the rear bumper beam mounting wiring harness (A).
3.
After loosening the mounting clips, then remove the rear bumper beam assembly (B).

4.
Install in the reverse order of removal.
  
Make sure the connector is plugged in properly.
Replace any damaged clips.
(5Door)
  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
1.
Remove the rear bumper cover.
(Refer to Rear Bumper - "Rear Bumper Cover")
2.
Remove the mounting clips, then remove the rear bumper beam assembly (A).

3.
Install in the reverse order of removal.
  
Replace any damaged clips.
Rear Bumper Beam Assembly Component Location
(4Door, 2Door) 1. Rear bumper beam assembly (5Door) 1. Rear bumper beam assembly ...

Front Seat
...

See also:

Engine And Transaxle Assembly Installation
Installation is in the reverse order of removal. Perform the following : • Adjust shift cable. • Adjust throttle cable. • ...

Basic Service Symbols
There are five primary symbols used to complement illustrations. These symbols indicate the part to apply such materials during service. Symbol Meaning ...

Operation
Function Of Safety Power Window When all door (Front, Rear) power window auto-up switch is operated, safety function is activated. 1. Safety function condition ...

Copyright © www.kifomanual.com 2014-2024