|
|
1. |
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
|
2. |
Remove the front seat shield outer cover.
(Refer to Front Seat - "Front Seat Shield Outer Cover")
|
3. |
Remove the front seat shield inner cover.
(Refer to Front Seat - "Front Seat Shield Inner Cover")
|
4. |
Remove the front seat lower protector (A).
|
5. |
Disconnect the connectors (A).
|
6. |
Push the lock pin (B), remove the front seat headrest (A).
|
7. |
Remove the front seat folding lever cover.
(2Door type only)
|
8. |
Push the clips (B) from the front seat back board (A).
|
9. |
To remove the air ventilation seat back duct (A), widen the both
sides of the clips (B) as the direction of the arrow and then pull down
the air ventilation seat back duct.
|
10. |
Pull out the protecter (A) by the front seat back frame.
|
11. |
Pull out the front seat lower protector (A).
|
12. |
Remove the front seat side protector (A).
|
13. |
Turn the front seat back cover inside out. Then pull out the headrest
guides (A) while pinching both side of the lower part of the guides,
and remove them.
|
14. |
Remove the front seat back cover (A) from the front seat back
frame.
|
15. |
After removing the hog-ring clips (A) on the front of seat back
and remove the front seat back cover (B).
|
16. |
Install in the reverse order of removal.
|
Trunk Lid Assembly Component Location
(4Door, 2Door)
1. Trunk lid assembly
...
Battery Sensor Description
Vehicles have many control units that use more electricity. These units
control their own system based on information from diverse sensors. It is important
to have a stable power supply as th ...
Light bulbs
WARNING - Lights
Prior to working on the light, firmly apply the parking brake, ensure that
the ignition switch is turned to the “LOCK”position and turn off the lights to avoid
burning your fingers ...